top of page

Working with Soap Clay - Tips and Tricks

Nov 6
2 min read

Working with soap clay is really fun, because it unlocks a whole new dimension when it comes to your design. From embeds to top your soap or to create intricate designs in a loaf soap, the possibilities are endless! However, to make sure that the use of soap clay is fun without giving you a headache, it is also important to nail the technique. If not, you may end up with crackly embeds, soap clay that is not moldable at all (that’s just soap bar), and a box of soap clay that has gone bad right when you need it! 


If you have joined the Design Basics: Soap Clay Workshop on 31st October, our instructor Jin has likely gone through these, and this will be a good recap! 


1. Use a recipe with lower hard oils (such as coconut) to make clay more malleable.

The recipe you received/ will receive during the workshop is a great start. If you want to get creative, be reminded that recipes with less hard oils will likely work better. 


2. Use oils with longer shelf life so that your soap clay lasts longer!

Some oils have a lower shelf life, like grapeseed and sunflower oil. Others have a longer shelf life, like coconut and jojoba oil. Since you are likely to make a batch of soap clay to use for several designs, be sure to check that your recipe consists of oils with longer shelf life. 


3. Don't leave your soap clay out for more than two days after saponification, otherwise it may be too hard to knead. Best to knead 24hrs after making the soap.

While we sometimes cut soap bars more than a few weeks after they saponify (oops!), soap clay is much more time-sensitive. You don’t want to end up with another block of CP soap when what you want is soap clay! 


4. For a smooth color soap clays, use micas or oxides.

Just as with making a CP bar, experiment at your own risks with herb powders etc. for colouring soap clay! Micas and oxides perform most reliably when it comes to colouring soap clay. The color smoothness of the soap clay is often important when creating 3D embeds.


5. Keep soap clay in an airtight container with a paper towel in a dark, cool and airy place.

Again, you are likely to create a batch of soap clay and store them for a bit. The best way to store soap clay is to use an airtight container with a paper towel. Place the container away from sunshine and humidity, and the soap clay should last you for some time! 



The best way to learn is hands-on. If you haven’t signed up, there is still one session of the Soap Clay Workshop held on the 7th Nov, Sat, 1-3pm, where you will get to make your own soap clay under the guidance of our friendly instructor. Find out more about it here, and sign up directly here.

bottom of page